Search Catalog
        
 All Categories    103 Series Direct Reading O-Ring/Groove Gages For Recessed Bores & Undercuts
All Categories > Groove Gages > 101/103 Series O-Ring Groove Gages > 103 Series Direct Reading O-Ring/Groove Gages For Recessed Bores & Undercuts > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

103 Series Direct Reading O-Ring/Groove Gages For Recessed Bores & Undercuts

Check up to five results to perform an action.

Easy to use; the gage arms retract to enter the smaller bore, then open into groove diameter
  • Direct reading
  • Customized standards in 1-2 days
  • Fast, accurate, repeatable measurements
  • Large, easy-to-read graduations, gage uses a 2-pointer system.




   
  Results 1 - 14 of 14 1 

Item #

Type

Measuring Range

Contact Travel

Reach of Arms Dim L

Max. Depth Groove Dim A

Contact Angle

Contact Tip Radius

Graduation/Resolution

103-303 O-Ring/Groove Gaging 0.8 to 1.6 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-304 O-Ring/Groove Gaging 1.2 to 2.0 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-305 O-Ring/Groove Gaging 1.6 to 2.4 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-306 O-Ring/Groove Gaging 2.0 to 2.8 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-307 O-Ring/Groove Gaging 2.4 to 3.2 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-308 O-Ring/Groove Gaging 2.8 to 3.6 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-309 O-Ring/Groove Gaging 3.2 to 4.0 Inch 0.8 Inch 3.15 Inch 0.20 Inch 45 Degrees SR 0.01 Inch 0.0005 Inch
103-403 O-Ring/Groove Gaging 20 to 40 mm 20 mm 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
103-404 O-Ring/Groove Gaging 30 to 50 mm 20 mm 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
103-405 O-Ring/Groove Gaging 40 to 60 mm 20 mm 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
103-406 O-Ring/Groove Gaging 50 to 70 mm 20 mm 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
103-407 O-Ring/Groove Gaging 60 to 80 mm 20 mm 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
103-408 O-Ring/Groove Gaging 70 to 90 mm 20 mm 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
103-409 O-Ring/Groove Gaging 80 to 100 mm 20 mm` 85 mm 5 mm 45 Degrees SR 0.2 mm 0.010 mm
  Results 1 - 14 of 14 1