Search Catalog
        
 All Categories    130 Series ID-OD Shallow Diameter Gages/Contact Points
All Categories > Groove Gages > 130/131/133/134/135 Series O.D-I.D. Shallow Diameter Gages > 130 Series ID-OD Shallow Diameter Gages/Contact Points > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

130 Series ID-OD Shallow Diameter Gages/Contact Points

Check up to five results to perform an action.

  • Large range, easy to use
  • Adjustable contacts with 0.500 inch (12.7 mm) retraction, gaging depth 0.03 inch (0.8 mm) thru 0.313 inch (8.00 mm)
  • 3-point, raised (0.500 inch /12.7 mm) gaging base allows for measuring over hubs
  • 2-point contact measuring
  • All contact wear areas hardened and ground
  • Change gaging direction ID to OD in seconds
  • Contact points can be rotated to extend useful gaging life.




   
  Results 1 - 8 of 8 1 

Item #

Item Name

ID Range

ID Range

OD Range

OD Range

Contact Travel

Contact Travel

Note

130-100 Gage without Indicator 0.8 to 4.4 Inch 20 to 112 mm 0.4 to 4.0 Inch 10 to 100 mm 0.500 Inch 12.7 mm Contact point travel depends on indicator selection.
130-200 Gage without Indicator 0.8 to 4.4 Inch 20 to 112 mm 0.4 to 4.0 Inch 10 to 100 mm 0.500 Inch 12.7 mm Contact point travel depends on indicator selection.
130-110 5/32 inch dia. Hardened and ground tool steel N/A N/A N/A N/A N/A N/A For special points contact Dyer
130-111 5/32 inch dia. Hardened and ground tool steel N/A N/A N/A N/A N/A N/A For special points contact Dyer
130-112 3/16 inch dia. Hardened and ground tool steel N/A N/A N/A N/A N/A N/A For special points contact Dyer
130-113 3/16 inch dia. Full ball carbide N/A N/A N/A N/A N/A N/A For special points contact Dyer
130-114 3/16 inch dia. Half ball carbide N/A N/A N/A N/A N/A N/A For special points contact Dyer
130-115 1/2 inch dia.x .050 thick steel disc hardened and hard chrome plated N/A N/A N/A N/A N/A N/A For special points contact Dyer
  Results 1 - 8 of 8 1